Guys, Thanks for following up. I understand the implications of 2-min data plotting. I'm good with the proposed option for expanding the time-window and like the snapshots shown above. Once more, we appreciate the effort put into customer service & continuous improvement. Thanks, LuisF.

I understand your point and don't have any suggestion to solve that in an easy way. Here's an example of the current profile we're working with (suppose 10mA = 100mV). Those current bursts every ~20 secs represent the eDRX interval and could range from a few seconds to minutes. We're aware of the coarse pan slider and we're using it right now for large recording sessions. I hope this request is a bit easier: Is there any way we could make the vertical axis fix to a specific number (say, 100% = 300 mA)? that way, we could get an insight of how often those higher current peaks occur using the 20-sec window view and the coarse pan slider. Overall we're happy with the purchase and with the prompt support provided so far. Thanks

We just purchased one ZS2102A and are working with a Cellular IoT device, optimizing it for low-power applications. We like the hardware capabilities and software is simple to use. One thing is really important in our use-case is the ability to see the overall current profile (in a scale of minutes). Right now in v2.3.5 we aren't able to zoom out more than 20 seconds, which is a turn-off. Is it possible to add it soon? Are there alternatives in the mean time to be able to do that? P.S. we tried exporting data to PulseView, but for large recording sessions it takes several minutes to just output it.